Updating old modular home with paneling

Your objective is to make the paneling look like a wall.Just apply the joint compound with a spatula and make it nice and smooth.Also we prefer the oil based primer, if you have adequate ventilation.After priming, you have to add two coats of regular paint.You'll end up with a smooth wall, but may still run the risk of paint that bleeds through or chips.

updating old modular home with paneling-2

Follow these steps to resurface plywood paneling: If you’ve come to the conclusion that all that filling and sanding is a lot of work, you may want to skip redoing the paneling in favor of a permanent fix.Just make sure to locate the studs or the fur strips beforehand so that you can fasten the drywall to it in the correct place.Tape and apply joint compound, wait a day for it to dry and then sand the areas.And if your wondering whether it pays to remove the paneling, the answer is no.You can use 1/4 inch dry wall since you just need a thin covering.

Leave a Reply